Edmunds Answers questions

What are problems when the ABS and parking brake light come on when I crank the truck and they stay on? Doesn't always happen. Chevy S-10.

hmcilwain — Thu, 18 Dec 2008 13:02:47 GMT

2000 S-10 Chevy V-6 4.3L The lights comes on and stay on when I crank up, but sometimes that don't come on. They stay on the whole time the truck is on.

Cannot get a starter to last more than 6 months in my 1994 Chevy S-10.

johnbc — Sat, 28 Feb 2009 18:09:28 GMT

I have a 1994 Chevy S10 4 cylinder 5 speed. standard transmission. I have put 5 starters in this vehicle in 4 years. All of these starters have been installed by professional mechanics. All of these starters have had issues with alignment (broken worm gear housing, burned out bushings). I'm told there are no starter shims recommended for this vehicle, which would seem to be the issue. Has anybody ran into this issue.
Johnbc

have a 2002 chevy s10 4x4 pick-up was fine drove it to work came out to go to work and now it wont go into gear

rogerredneck20 — Fri, 04 Jan 2008 12:39:23 GMT

felt fine day before went to go to work the clutch felt sluggesh but no problems going to work came out to go home the truck wont go into gear at all its a manual stick

how can i change my 1982 s10 vin number to another s10 i got

dylan_djd — Tue, 22 Jan 2008 22:32:22 GMT

can i changemy vin number off my 1982 s10 cab to another s10 cab that i got or how to do it

have a 99 chevy s_10,84k, ,won't start

fepjr — Thu, 31 Jan 2008 12:36:03 GMT

i have a 99 chevy s_10, it died at an intersection, had it towed home,replaced the fuel filter, sounded like it wasn't getting fuel, the fuel pump sounds like its running fine.
it turns over just not connecting,have checked all the fuses ,has a brand new starter, alternator,and battery.
anyone have any ideas

thanx, frank

I have A 1994 Chevy S-10 the actuator in the front is not working Why??

autolerfald — Tue, 05 Feb 2008 10:00:06 GMT

The push buttons act all weird and will not lock in the front end

chevyS10 Brake Problem

chevys12 — Sun, 10 Feb 2008 22:42:28 GMT

I steped on the brake pretty hard the other day and all of a sudden brake light came on and brakes themselves went "loose"- does not stop the truck chevy S10 until apply brake all the way, I am just wondering what could be wrong, i can still brake but am afraid if i drive it to the mechanic, it might be dangrous. any thoughts?

1990 S10-4X4-4.3-auto pickup. EVERYTHING new the brake system,still no rear brakes. why.bled the brakes, adjust

chevys4evr — Mon, 11 Feb 2008 14:48:21 GMT

replace frunt pads,rear drums,wheel cylinders,shoes, brake lines frunt to rear,both lines at rear, frunt lines to wheels,master cylinder,bled the system..... no rear brakes.....

want to replace drums with disks on rear.what will work, from what

chevys4evr — Mon, 11 Feb 2008 15:03:50 GMT

1990 S10 4X4 pickup.. 4.3 auto has drums on rear, want to change to disks...getting most parts from wrecking yard, off of what ? ? ?

1996 Chevy S-10 Cruise control works perfectly when on but pops off after a few miles,Why?

dano7658 — Mon, 18 Feb 2008 19:48:35 GMT

Cruise control won't hold in after a few miles. Is there a solenoid or something that needs to be replaced?

00 Chevrolet S-10 extended cab pickup. Installed rebuilt transmissino. Shifts to 4th too soon.

aweston — Sun, 02 Mar 2008 20:28:24 GMT

I had a reconditioned xmsn installed by mechanic. It shifts great, runs great except at 40mph it shifts into last gear as if I am doing 55mph which makes it loud and lose pwr. I mash gas some more and it shifts down fine and then shifts into last gear once I reach around 50. It's maddening. please help. Mech says its fine and their is no adjustment.

I have a 2002 Chevy S-10 4 cylinder auto transmission. It started clicking then I lost the reverse seems to be whining. What's wrong?

ingram2 — Fri, 07 Mar 2008 11:05:11 GMT

My auto trans is winning and lost reverse only have 42k miles on the truck what could be the problem its a 4 cyl new tires, been hearing a clacking in reverse and from first to second but no other problems/
Do I need a new trans? HELP

ABS kicked in twice without touching the brake pedal - Chevy S-10

redx1 — Sun, 09 Mar 2008 11:03:34 GMT

I have a 99 S-10 2.2L. I was traveling at highway speeds on I-75 during the rain when it felt like the ABS kicked in twice in a row and I hadn't attempted to brake, it was out of the blue. My instrument cluster went haywire for a minute and then settled down to just an ABS light. Fortunetly I didn't lose control of the S-10 I just slowed down a bit. Any ideas as to the cause?

Can 1995 Pontiac 3.1 engine out of a Grand Am somehow be converted to fit a 1987 Chevy S-10 4x4 with a 2.8? Maybe-Thanks

bigblockguy — Wed, 12 Mar 2008 20:46:07 GMT

Have a great running 3.1 and a gutless 2.8

I bought a 2003 Chevy S-10 last night. All gears were working great. This morning it won't go in reverse. What's the problem?

leew1972 — Sun, 30 Mar 2008 08:00:29 GMT

the trans was doing good last night.all gear worked great.this morning i got in it to back up and reverse is out.all other gears will pull.i was just wondering what the problem could be and how i could fix it?

Is it possible to remove the oil pan from a 1996 Chevy S-10 2.2 litre without raising the motor?

gruszewski — Sun, 04 May 2008 08:45:26 GMT

need to replace bearings and oil pump. i don't want to remove motor to do job. can i remove the oil pan without raising the motor? 2.2 litre 1996 S-10. my oil pressure was always reading low when idling and i think i started to spin a bearing.

Does anyone have any ideas why my Chevy S-10 power steering is still leaking? Just put a new high pressure hose on.

connie60 — Mon, 02 Jun 2008 20:59:08 GMT

dose anyone have any ideals why my s10 power steering is still leaking just put a new high pressure hose on it and new pump?

Soft brake pedal on '98 Chevy S10. Fronts bleed fine. Good bleed at dynamic load balance, but air at rear wheels. Suggestions?

jeschafe — Sun, 22 Jun 2008 23:34:40 GMT

I'm trying to track down the source of air bubbles while bleeding the rear brakes on a '98 S10. I get good bleed on the fronts as well as the zerk fitting at the dynamic load balance switch. That switch has two input(?) lines and one output line that get's split to each rear wheel. I've tried with and without pulling on the load level bar, but I get very little release of the pedal and mostly air from the zerk fittings at the wheels. The manual says "don't touch" the dynamic load switch, but I'm pretty sure that's my problem. Thanks.

2003 Chevy S-10. How do I hook up a tow bar? The bumper is plastic. I was given a tow bar with chains on the ends.

sonnyf — Wed, 20 Aug 2008 09:13:31 GMT

no where to hook it to the front of the truck.It is a 4x4

No brakes on my 95 Chevy S-10

fritz68 — Sun, 31 Aug 2008 11:13:01 GMT

I up graded the front brakes from a 98 s-10 with daul pinston calipers bleed them out, drove around town then pedal went to the floor ,so i changed the master cyl. And bench bleed it and now i can't get no pedal. I bleed two big bottle of fluid thru the truck. It acts like i got a bad master cyl., But it was new not rebuild.New calipers all the way round and lines was replced last year.No abs system in trunk too.

I have an '88 S-10 4WD. I am trying to bleed the rear brakes, but the fitting is recessed; how can I bleed them?

dowdy — Sat, 06 Sep 2008 19:44:26 GMT

I'm doing a brake system overhaul. I'm trying to bleed the rear brakes by attaching a hose to the fitting and going into a jar of brake fluid. I am unable to do this because the fitting is recessed and there is no way to put a wrench on the fitting. Any ideas on how I can do this, or should I just I try another method?

How do you loosen the tension on the belt to change an alternator on a 91 Chevy S-10?

hunte567 — Mon, 08 Sep 2008 22:39:16 GMT

how do you loosen the tension on the belt to change an alternator on a 91 s10

What synthetic gearlube can I use in a 2001 Chevy S-10 with a locking differential in the rear? (Mobil 1 LS 75-90?)

spud8 — Fri, 19 Sep 2008 19:00:50 GMT

The oil companies will not give me an answer as to what synthetic gearlube I can use in a 2001 S10 locking differential. The manual says not to add friction modifier like for a limited slip diff. Can I use a gl-5 lube, like Mobil LS 75-90? I would like to use the same lube in the front open diff.

What causes my 1998 Chevy S-10 to lose electrical power? While driving down road, it acts like the key was turned off and on.

signbob — Mon, 03 Nov 2008 20:53:12 GMT

truck has 130,000 miles, 4cyl, 5 speed

I have to replace the pittman and idler arm on my 1996 Chevy S-10 4x4. Can I do it myself?

ztgbrawler — Sun, 14 Dec 2008 20:24:31 GMT

I have a 1996 Chevy S10 (4x4). I had to buy a pittman arm and an idler arm and their associated connectors and bushings. I cannot find a reference to either in my Haynes repair manual, do they come with other names? If so, is it an easy repair? I'm pretty familiar with my truck, but have never had to do any work on any steering system. Any advice would sure be helpful. Thanks a lot.

Zak

How to remove retainer off of rear axle shaft? Chevrolet S-10 Blazer.

refils — Thu, 01 Jan 2009 13:37:49 GMT

I would like to know how to remove the retainer off of the rear axle shaft on the left side for a 1987 chevrolet s-10 blazer?

Rear drum to disc-brake conversion on a Chevy S-10?

ztgbrawler — Mon, 05 Jan 2009 23:17:24 GMT

Hey there,

I saw that you answered someone's question about converting drums to discs on an older S10. I have a 1996 Chevy S10 4x4, and have had several problems with either the rear drums not automatically adjusting themselves (I think they're supposed to), or with my front pads just wearing out too fast because of all the load on them. Would it be practical to swap my rear drums for discs? I saw that because it is a light truck, I would have to use what you call a preportional valve. Is this a hard swap to make? I am something of a weekend-mechanic, but I don't really do any of my own machining. Let me know what you think.

Thanks,

Zak

Where to buy a stealth sub box for my 1998 Chevy S-10 extended cab?

keedyj1 — Mon, 16 Feb 2009 18:14:48 GMT

I'm wanting to purchase a stealth sub box for my truck. where can i find one without having to purchase the subs with it???

What type of starter for a 98 Chevy S-10 LS 2.2 litre 4 cylinder ?

lanceman2 — Wed, 11 Mar 2009 14:24:57 GMT

Wanting to purchase a starter for my '98 S-10, LS. It has a 4 cylinder 2.2 litre engine with an auto. transmission. How do I tell if its a direct drive, or a gear reduction starter? Thanks in advance for the help.

Can't get back rotors off Chevy S-10 truck. Got calipers off but need help with rotors.

mother3 — Sun, 19 Apr 2009 10:07:05 GMT

I have a 2003 Chevy truck. Am replacing back rotors and brakes. I got the caliper off easy but can't get rotor drum off. It's loose but won't come off. Any help would be great. Thanks

What is the firing order for a 94 Chevy S-10?

turbo16 — Thu, 23 Apr 2009 11:23:40 GMT

I bought a S10 that supposedly had the engine replaced and the firing order is messed up. I need to know the firing order for the truck.

1998 Chevy S-10, 2WD, 2.2L. What could cause excessive play in steering?

lsg1277 — Thu, 23 Apr 2009 15:10:48 GMT

Mileage:100K+/. There seems to be about 2.5-3" of play in each direction at the steering wheel. While turning the wheel from left to right in this play region (engine on,front centered forward), I see that the steering shaft turns accordingly (no play), but there's no movement at the Pitman arm.

New rear brakes pads, drums and calipers and bled but no brake pressure. 99 Chevy S-10. Any suggestions?

oldfart59 — Mon, 04 May 2009 19:50:32 GMT

99 Chevy S10 4 x 4

What is the proper name for the glass on the extended section of the cab (side) on a 1995 Chevy S10 2.2L or part #.

bigh34 — Tue, 19 May 2009 18:34:51 GMT

On a 1995 S10 extended cab. 2.2L manual transmission, what is the proper name for the side glass on the extended section of the cab or part #.

How do I diagnose and repair a Chevy S-10 showing PO452 troube code?

doug81 — Wed, 20 May 2009 17:52:34 GMT

2000 S-10 with 4.3 4wd & auto tranny

Does anyone knows what the "valve" under the MB cylinder does? Should that be re-set after brake lines have been replaced? Chevy S-10.

bugaboo3 — Fri, 22 May 2009 11:23:29 GMT

I have just replaced all front brake lines in the S10 - now the ABS light is on - do I have the reset (bleed) the small APV under the MB cylinder? Will that take care of the light? Should I check the ABS wheel sensor for dirt deposit?

2002 Chevrolet S-10 shock replacement.

skeet317 — Sat, 13 Jun 2009 16:13:31 GMT

I have purchased shocks for front and back for my S-10. I do have instructions from the Alldata DIY site, and Haynes manual. Looks like it will be straight forward, but I'm sort of new to learning to maintain vehicles. Just wondered if there are any special situations I should be aware of before starting the job. Rear looks very straight forward. The front appears that the top nut is just inside the access panel in the wheel well. Instructions say to remove through lower control arm. With my Jack at Maximum extension, and Jackstands at max height, it looks like I don't have a lot of clearance to get it through the bottom. Is that going to be an Issue? Any suggestions will be appreciated.I have applied PB blaster to the nuts to prepare, and they don't appear to have a lot of rust anyway.

1989 Chevy S10 and no brakes at all.

tammyv67 — Sat, 13 Jun 2009 21:18:49 GMT

Master cylinder is still full of fluid. Brake booster has been replaced and still nothing. Any ideas?

89 Chevy S-10 no brakes.

tammyv67 — Sat, 13 Jun 2009 22:33:14 GMT

Hello Tony, You answered my question I posted and wanted to know some specifics. Well no the brakes have not been worked on lately. I happened all of a sudden. And the only reason we changed the booster is because we asked a employee at O'Reilly's Auto Parts and that is what they suggested was wrong. I would be very thankful if you could give me your opinion of a solution.
Thanks, Tammy

2003 Chevy S-10 2WD. When braking the rear wheels drag and it feels like I can't stop the vehicle, What can I do?

epigneno — Tue, 04 Aug 2009 14:18:15 GMT

When I brake the rear wheels on my Chevy S10 2003 2wd Drag so, I adjusted the rear brakes,and they were just fine,

A few days after, when braking,the rear wheels drag again and feels like I can't stop the vehicle.

I adjusted the shoes again and they where fine, after another few days the problem is back. What can I do or what's the problem?

Brake fluid drain and replace on a Chevy S-10?

skeet317 — Fri, 28 Aug 2009 21:58:09 GMT

Is it advisable to drain and replace brake fluid?

I have a 2002 S-10 with 95K that I just purchased, have completed other normal 90K mile maintenance items. If this is advisable, how do I go about the replacement?

'98 Chevy S-10 fine yesterday, today front and rear brake lines are leaking badly, can only stop using emergency brake. Any help?

1965stang — Wed, 02 Sep 2009 23:47:40 GMT

Have 4-cylinder 1998 Chevy S-10 (I think it has ABS). The brakes felt fine yesterday. Today drove it 0.1 mile from open/unattended overflow lot to my home, brake felt a little funny when I parked. Checked and added brake fluid. Drove maybe a quarter mile to stop sign and pedal went to floor without even slowing truck; had to push emergency brake to keep from entering highway. Thought it was supposed to have dual system to where both front and rear wouldn't go out at same time. Would master cylinder malfunction cause both lines to blow at same time? Or could someone have tampered...I haven't been able to get totally under truck to locate exact place of leaks due to darkness...and don't want to call sheriff's dept. unless I know for sure. (There is a man being evicted in this mobile home park that lost court case yesterday and he is blaming his eviction on most of the rest of the residents).

Drivers side back wheel squeaks when driving - all the time. 1999 Chevy S-10.

zward — Mon, 28 Sep 2009 19:04:44 GMT

There is no grinding sound, just squeaking while driving. Do you think this might be a wheel bearing or U-joint?
Thanks

Gas mileage on a 1994 Chevy S-10?

tpleasants — Wed, 02 Jan 2008 10:02:00 GMT

What is the gas mileage for 1994 4-cylinder Chevy S10 pickup?

93 Chevy S-10 pickup truck engine shutters when idle

bbamba — Thu, 03 Jan 2008 19:55:16 GMT

i have a 93 s-10 pickup, 4.3 liter engine, two wheel drive, automatic. my engine shutters when it idles. i put fuel injector cleaner in it, and had my oil changed. the truck has approx. 244,000 miles on it.

Have no heat in 2000 S-10. Replaced thermostst and flushed system. Worked for 2 days and now have no heat again.

lankcrum — Fri, 04 Jan 2008 22:16:06 GMT

Was wondering if there is a problem with the water pump. Truck does not over heat and all gages are indicating normal temperatures.

1991 Chevy S10 Tahoe. Where do I find the fuse to the Fuel Pump. book says the engine compartment, I cant find it

deaculver — Sat, 05 Jan 2008 10:30:16 GMT

There is no fuel going into the enjector. I cant hear the fuel pump turn on.

2001 s-10 2.2 liter engine driving down freeway 65 mph motor shuts down lights work gauges go crazy wont restart?

duanie — Mon, 28 Jan 2008 13:46:28 GMT

the battery drained after a few hours put in a new one motor turns over but wont start truck has 100,000 miles

I have a 1994 Chevy s-10 2.2 When it warms up it starts running all sluggish and missing any ideas Thanks Chad

autolerfald — Wed, 30 Jan 2008 11:09:15 GMT

1994 S-10 2.2 Ignition module problem??

i have s10 pickup 2002. my headlights &dashlights flicker?

candyman7 — Sat, 09 Feb 2008 21:22:43 GMT

s10 pickup 2002 4.3. when in running mode all lights flicker?