Edmunds Answers questions

Can you tell motor size by vin#? 68 Ford F-100.

dennisi — Thu, 26 Mar 2009 20:56:58 GMT

I have 68 Ford F-100 can you tell me the engine size by vin# It's F10ARC93498

Where can I buy freeze plugs for my '68 Ford F-100?

dennisi — Wed, 01 Apr 2009 21:48:29 GMT

I have the rear freeze plug out on my 68 Ford F-100 240cu 6 !! It's in the head! I don't wan't to pull head or motor or pull the heater & cut a hole in floor pan! I need one of those plugs that bolt in!! Any ideas??

Looking for a wiring harness for a 1963 Ford F-100 pickup. Any available anywhere?

treeman01 — Mon, 17 Mar 2008 23:01:37 GMT

I have a 1963 Ford F100 that needs a new wiring harness....does anyone know where I can find one, or a wrecked F100 to take it out of?

Treeman01

How do I remove the windshield in my 1978 Ford F-100 and not damage my seal? It is a one piece seal.

78ghost — Thu, 03 Apr 2008 19:43:03 GMT

1978 ford f-100 pick-up, i am trying to remove the windshield to fix a rust spot. it has a solid seal and i do not want to damage the seal. what is a easy or best way to remove, short of going to a glass shop.

thank you, 78GHOST

How do I know where to position a crossmember motor mount for a 302 in my 64 Ford F-100?

rford302 — Mon, 11 Aug 2008 23:31:01 GMT

engine swap 1964 f 100

Will the stock radiator work for a 302 in a 64 Ford F-100?

rford302 — Tue, 12 Aug 2008 00:02:11 GMT

302 in a f100

1977 Ford F-100 fuse box. Repair manual photo unreadable. What is each fuse for and amps?

jedidiah1 — Sat, 21 Feb 2009 05:58:11 GMT

Ive a F-100 1977 and a repair manual. the photo of the fuse box is unreadable. could someone tell me what each fuse is for and the fuse amp
thanks

Where is the back freeze plug on a 68 Ford F-100 240cu?

dennisi — Fri, 27 Mar 2009 11:34:38 GMT

Thanks mr shiftright!

I have been working on this truck along time!! Got it running ,put water in it !! All came out the back !!Found a freeze plug on the ground !!Where Is it & can I fix it in the truck ?? I'll cut a hole in floor board if needed !!

1979 Ford F-100 pickup 3 speed column shift. Is there an adjustment under the steering wheel to tighten it up?

scottpark — Fri, 26 Jun 2009 16:22:10 GMT

From 1st gear to second it sometimes just goes nowhere but stays in first ,real sloppy, can it be adjusted in the column?

I have a '75 Ford F-100 302. Timing info said to look at manual for timing. Have no manual. How do I figure out the best timing?

bige5 — Sun, 06 Sep 2009 07:50:32 GMT

75 F-100 302-2-3sp-man.92.000 mile all org.

Truck runs ok just bothers me not knowing the right spec.
I am also thinking of installing EFI, any inpu.?

1973 Ford F-100 pickup. I need info on the blower resistor.

binners — Sun, 01 Nov 2009 12:17:56 GMT

I cannot get to the blower resistor. Any help would be appreciated!

I need to know how to blow out the fuel line from the gas tank to the fuel pump on my 1973 Ford F-100 pickup.

rlrufus — Fri, 06 Nov 2009 11:47:45 GMT

How do I go about blowing the fuel line from the tank to the pump on my 1971 Ford F-100 pickup

My 1981 Ford F-100 truck, 6 cylinder, 300 cid need lowering kit, 2-3 front, 4-5 rear, interior trim and tie rod ends. Where to find?

robhern — Sun, 19 Apr 2009 13:56:02 GMT

I am looking for parts for my truck, 1981 f-100 6 cyl 300 cid. I need a lowering kit, 2-3 front & 4-5 rear, I also need the interior trim for the same and tie rod ends. Without breaking the bank. I would also like to find other parts that are avaliable for my truck.

I have a 1977 Ford F-100 with a 400, 3 speed automatic. Starter turns when keys are out of the ignition, in all gears.

fordtruck77 — Sat, 01 Aug 2009 21:28:51 GMT

I have a 1977 Ford F-100 with a 400, 3 sp auto. I had to change the battery. As soon as I replaced the cables onto the battery, the starter turns. The keys are out of the ignition, it does it in all gears, even reverse. Is this a problem with the starter or in the ignition switch?

Why would my '73 Ford F-100 delay when I put it in drive? Reverse is ok. Take about 2 seconds to shift to drive and 2nd gear.

amerilast — Mon, 24 Aug 2009 21:26:54 GMT

Is an automatic transmission.

Where can I find a split bench seat for a 67 Ford F-100?

67ford — Tue, 20 Oct 2009 15:48:23 GMT

Restoring a 67 Ford F-100 and am looking for a bench seat. What year truck seats are compatible with bolt pattern?

1954 Ford F-100 wiring.

hermanceusmc — Wed, 11 Nov 2009 20:17:04 GMT

I have a 54 F-100 which was converted to a 12 volt. I am not getting any power to the coil and only have a 78 bronco and 54-55 f-100 diagram to go off. I have tried to follow the diagrams and have had no success. Any suggestions would be appreciated.