Edmunds Answers questions

Anybody know how to reprogram the keyless entry remote for a 96 mazda protege?

trpadrs — Thu, 07 Feb 2008 08:18:23 GMT

After draining battery accidentally, it stopped working. I have tried several ways found on many different web pages, but none worked- actually none of them were for the 96 protege. Does anybody know a procedure to reprogram the keyless entry remote? Thanks.

k.

If you had to do it over again, which model of mx-5 would you buy and why?

luckysol88 — Mon, 07 Jan 2008 13:19:06 GMT

I am in the market for a Mazda Miata

Help finding a bike rack for my Mazda3?

glenwatkins — Fri, 28 Dec 2007 04:01:46 GMT

I have a 2006 Mazda3 that I need to get a bike rack for. Any recommendations?

I have 1995 Mazda 626 4-cyl; "O/D Off" light flashes on and off.

chrism98312 — Mon, 31 Dec 2007 20:50:18 GMT

I put car in tranny shop the 11th of this month with "O/D Off" light flashing on and off, no shift to 2nd range and no overdrive. Overdrive selector button on shifter no longer controls anything.

Got car back and 3 miles down freeway the "O/D Off" light starts flashing again. Over next few days, the "no 2nd range and no O/D" symptoms reappeared.

Took car back to tranny shop and they rebuilt tranny again, installed auxilliary transmission oil cooler. This time they got 3 miles down the freeway before the "O/D Off" light started flashing again. So they took the car back today (Dec 31) and there it sits. Any suggestions will be appreciated.

can i buy an inverter to power a microwave in the car

mazda20 — Wed, 02 Jan 2008 18:39:35 GMT

can i buy a inverter to power an microwave for heating food. i have a 626 mazda sedan, 1998.

no engine spark in mazda 2001 b 3000

young11 — Sat, 05 Jan 2008 09:41:32 GMT

drove truck to repair shop. Had plugs and wires replaced. Now they can not get engine spark. Has been 2 wks. They still have no answers. They want to replace computer.

I am doing an install on a 08 mazda cx-7. I need information on the removal of the radio.

wilholman — Tue, 08 Jan 2008 12:39:30 GMT

I need info on how to remove radio on an 08 mazda cx-7

2001 mazda 626, driver side wiper doesn't work.

cfed — Wed, 23 Jan 2008 15:01:18 GMT

The wiper on the passenger side works fine. The driver side doesn't work. I replaced the Wiper arm but it still won't wipe. Help

Mazda MX6 1992 import - 4 wheel steering ecu problem - can anyone help?

david126 — Thu, 31 Jan 2008 12:39:16 GMT

Had problem diagnosed but ecu won't talk to diagnostics. Is there an ecu wizard out there that can help me or does anyone know on anywhere that repairs ecus? The warning light for the 4 wheel steer came on and vehicle is now locked in 2 wheel steer.

Mazda Protege water leak

jessi123 — Tue, 05 Feb 2008 09:53:58 GMT

IT IS FOR 2001 MAZDA PROTEGE AND I BELIEVE THE LEAK MIGHT BE COMING FROM PASSENGER SIDE DOOR IS THERE ANYTHING TO USE TO FIX LEAK. PLEASE HELP THANK YOU.

how to take apart door panel on driver side of a mazda 626

suchy — Thu, 07 Feb 2008 04:54:33 GMT

how to take apart door panel on driver side of a mazda 626 i unscrewed all the screws and lifted the panel but i cant take it apart

Need some help! 2004 Mazda6 - how do I change the front driver side running light? Can't get passed the breather box

jeeps2 — Sun, 10 Feb 2008 13:30:42 GMT

Cant get passed the air filter box. How do I change the driver side running light. It is next to the turn signal in the head light housing. Thanks for any help.

I need a way to insulate my car sound system cheaply and affectively. Help?

paulyyyx3 — Mon, 11 Feb 2008 20:11:50 GMT

I am aware of products such as Dynamat but was looking to see if anyone knew of maybe some household products or something cheap that would stop/muffle the rattling of my car? I have a 97 Mazda Protege fyi. Ive got 2 12'' kenwood subs and a 600W kenwood amp. Any suggestions at all are appreciated. Thanks!

Why won't 95 Mazda Millenia S torque converter lockup release?

apiarx — Tue, 12 Feb 2008 11:21:55 GMT

95 Mazda Millenia S smacked hard under front end on steep paved mountain intersection at less than 5 mph. Immediately, torque converter locked up and will not release. Fluid is normal, no leaks. Shifting is still smooth and appropriate for speed. Fuel economy is not changed. No trouble lights lit (ie. check engine, etc.)on dashboard. Car has 155,000 miles. Other than this problem, car is perfect.

Trans shop quotes $1,300 to fix, but "could be more if we run into additional problems." (In other words, bend over and open your... er, check book). Local Mazda dealer won't even look at it. I'd be willing to live with permanent DIS-engagement, if there is some way to do it cheaply. I've driven over 5,000 miles since incident--cold starts are difficult, but I make weekly 600 mile interstate roundtrips & car does fine at speed. But to get started requires revving engine in neutral before shifting into Drive. Then transmission slams into gear. It won't take this abuse indefinitely.

I will appreciate any help anyone may offer.

I would like to upgrade my 1999 Mazda Protege CD Player with one that can play burned CDs. What are the spec's ?

adb7477 — Mon, 18 Feb 2008 00:23:18 GMT

I can play "burned" homemade CDs in my 2004 Toyota Highlander CD Player. But the same "burned" CDs will not play in my brother's 1999 Mazda Protege. A co-worker recommended buying a new CD player as the older players do not recognize the codec or format of "burned" CDs. I would like to surprise my brother with a newer CD player for his Protege so that he can listen to his "burned" CDs. What are the dimensional specs of the factory installed CD for his '99 Protege and can you recommend a basic and inexpensive CD player for this purpose ?? Thanks.

how to replace A/T GEAR INDICATOR LETTERING PLATE mazda protege

aavenger — Mon, 18 Feb 2008 09:00:43 GMT

A/T GEAR INDICATOR LETTERING PLATE broke in pieces need to replace its the plate that indicates what gear u are in

Can anyone tell me the correct way to change rear brake pads on an '03 Mazda Protege?

marke4 — Mon, 18 Feb 2008 11:28:12 GMT

When I removed the wheel and loosened the caliper I noticed that the integratedparking brake cable limited the travel of the caliper. I'm not sure what the correct procedure is for loosening or removing the cable to access the pads Can someone help? Thanks

What is the estimated cost of labor/parts for 2001 Mazda Protege w/ rear disc brakes?

asa330 — Thu, 28 Feb 2008 19:25:12 GMT

2001 Protege ES needs rear rotors and pads replaced

anyone know what's wrong when the Mazda 626 won't go in reverse gear

topmo — Tue, 04 Mar 2008 20:50:18 GMT

the car has been making a thumping noise when it starts in the morning and we shift from park to reverse, now it won't go in reverse at all, seems ok going forward in drive.

can a 07 Mazda MAZDA3 2.0 stick shift be modified to tow with rv 4wheel down without damaging transaxel?

daniel5434 — Fri, 07 Mar 2008 11:13:56 GMT

Mazda refuses to talk about their warning not to tow a Mazda3 4 wheels down due to potential transaxel damage. Can you explain the potential damage and if it can be modified to overcome the tech problem?

Mazda 626 cylinder heads

pepper01 — Sun, 09 Mar 2008 19:16:57 GMT

I am replacing the cylinder head gaskets on my 2000 Mazda 626. My shop manual refers to the "front" and "rear" heads, but the gaskets are labeled "left" and "right". Which head is the "right" head? The one near the firewall, or the one in front by the radiator? Up side and down side is easy to discern, but either gasket looks like it fits either head just fine, and I know it is critically important to get it right. Thanks, Pepper01

My Mazda MX-3 is kicking white smoke out of the exhaust

tony83 — Fri, 14 Mar 2008 16:45:24 GMT

My car is a Mazda MX-3 automatic and it is kicking white smoke out of the exhaust but it only does it when it has been sitting for a day or 2 but if I leave it ticking over for 5 to 10 minutes it clears up but when I start it back up it happens again can any one help

I have a 1992 Mazda Mpv V6 front wheel drive. It won't rev past 2300 rpms, and that's in all the gears, why?

bronxx — Sat, 15 Mar 2008 11:09:58 GMT

as the van approaches the 2300 rpms mark the engine starts surging

Hi can anyone help? I'm trying to find out how hard it is to do a clutch on an 03 Mazda MAZDA6. Cheers

dom1185 — Sat, 15 Mar 2008 14:27:27 GMT

i'm trying to find out how to do a clutch on a mazda 6

Have 1994 Mazda Protege. Emergency brake quit working after replacing rear brakes. Any suggestions?

cbrewin — Sun, 30 Mar 2008 23:23:10 GMT

rear disc brakes were replaced and now emergency brake does not work and it worked properly before.

Rusty nut - how should I remove it?

accessdabbler — Tue, 01 Apr 2008 10:53:34 GMT

Trying to remove a nut and bolt from my lower ball joint (Mazda Protege 1996) but it will not move! I've tried WD40, propane torch, impact drill, wrenches and vise-grips. Nut is solid. I've rounded the nut now. Having trouble on both left and right lower ball joint.

Is my last option a nut splitter? The bolt and nut shouldn't be too hard to replace at a hardware store.

Car cooked. May have blown head gasket not sure. No water in oil but spark plugs wet. Internal engine damage?

nzbushman — Fri, 02 May 2008 18:17:15 GMT

My Mrs overheated her 1992 Mazda Marvie Proceed due to a split radiator hose.Car may have a blown head gasket or warped head but i can see no visible signs of it.Car will not start so i pulled spark plugs out which were wet .No water in oil so do you think there will be major damage? im going to put plugs back in and try to start it again today. Thanks.Karl Maley

What are the best tire brands for replacement on 2006 Mazda MAZDA3 sedan?

ew1 — Wed, 07 May 2008 13:19:33 GMT

Hi, have a regular Mazda3 sedan, not a speed version or hatchback. I rotated my original tires a while back and they had worn terribly, giving me a wobbly ride. Need to buy a set this summer. I want a comfortable, safe ride. Not looking to buy Michelin but want a well perfoming tire. Any suggestions? THX

MAZDA 626 Steering

hackbarth6 — Tue, 13 May 2008 09:23:59 GMT

WHAT WOULD CAUSE YOUR STEERIING TO PULL TO THE LEFT ON EXCELERATION AND RIGHT ON LET OFF

What is the towing capacity on a 200x Mazda Protege 1.6L LS?

lvlylaura — Wed, 04 Jun 2008 09:41:17 GMT

I have checked a million websites and the towing capacity is N/A. does that mean I cannot tow? if I do will it wreck my engine?

How to remove front rotors on the Mazda Protege?

tiger1210 — Wed, 18 Jun 2008 13:06:17 GMT

Is it a lug nut that screws off?

Is keyless entry standard on 2002 Mazda Tribute?

dollwmn1 — Sun, 22 Jun 2008 01:51:23 GMT

Hi, just bought a used 2002 Mazda Tribute. I was not provided with a factory key and I noticed there is only 1 door with a key access. Is this because it should have a keyless entry? Is keyless entry a standard feature for this vehicle, and if so, how do I find a remote?

Mazda Mazda6 problem - timing out when hot

rbtc67 — Wed, 02 Jul 2008 11:26:06 GMT

I have a Mazda6 2.3 sport petrol (2002). When the car heats up it begins to idle at the wrong speed,it idles up and down but never stays constant.

When driving it runs Ok on higher revs, but when running slow it is jerky.

It has been into Mazda for 2 days and they still have not found the problem. Please Help!

Why can't I hear callers while using my Bluetooth system in my Mazda CX-9?

mtraynum — Sat, 12 Jul 2008 15:30:14 GMT

I have set up the bluetooth system in my CX9 vehicle. I can call people and receive calls. However, I can not here whoever is on the other end of the call. They can hear me, but I can anything from them. Is there something that I did wrong in the set up?

What is the Interior Cargo HEIGHT for a Mazda MAZDA3 Hatchback?

cinditeach — Sat, 19 Jul 2008 21:21:09 GMT

I need the trunk Floor to ceiling height in the Hatchback. Thanks

My daughter just got a 2004 Mazda MPV van and swears there is no spare tire; the van didn't come with an owner's manual.

hyrum — Wed, 23 Jul 2008 00:12:12 GMT

I looked underneath the back and didn't see a spare. I read in the forum about a tire hoist; where is it located and how is it accessed? I need to know this soon please; she has a bad tire and may need her spare that she insists doesn't exist. Thanks

How come when I open my rear windows the car feel likes it is going to come apart. It starts shaking. Mazda MAZDA5

scaler_b — Sat, 26 Jul 2008 22:54:51 GMT

When i open my rear windows on my Mazda5 when I am on the highway it feels like the whole car is going to shake apart. This only seems to happen on the highway at fast speeds.

How does Mazda's sales and forecast numbers compare to the competition?

pingman1 — Wed, 30 Jul 2008 18:00:13 GMT

I noticed Mazda is not mentioned when the latest sales numbers
are posted for Honda, Toyoto, GM, Ford, Chrysler, VW, Etc., How
do they compare and what are the future expections?

Has any one heard of a problem with MAZDA5 front brake discs? I have gone through 3 sets in under a year.

sevenofnine — Wed, 27 Aug 2008 12:01:46 GMT

Had the Mazda 5 from new July 07 dealer changed first set of discs 12k miles second set 25k miles and 3 set 1400 miles later had the new discs skimmed twice all the discs keep warping and going blue. I am not a boy racer and do not break heavy. I do around 25k miles a year mostly moterway driving any ideas?

How do I remove the spare tire from a 2000 Mazda MPV.

apblount — Sun, 31 Aug 2008 18:15:10 GMT

How do I remove the spare tire from a 2000 Mazda MPV

Anyone experience a steering clunk when simply turning the steering wheel right or left? Mazda MPV.

dporcaro — Mon, 01 Sep 2008 17:12:45 GMT

2002 MPV 90K miles.

Clunking sound as the steering wheel is turned. Vehicle can be stationary or moving.

Mazda 626. When braking, just before I come to a standstill there is a buzzing noise under the hood/bonnet.

bpark — Thu, 04 Sep 2008 07:37:32 GMT

The noise sounds like a spring vibrating or a pump revving. The brakes also seem to release a bit. I assume it is something to do with the abs system but I have had it checked out at a service station but the can`t find the fault. The brakes work perfectly at speed and the only time this happens is just before I stop. I would be very grateful if someone knows what`s going on.

Are Toyo Proxes A18 tires unidirectional (205/50R17)? I can't find any information about this for my MAZDA5.

woodall — Fri, 05 Sep 2008 10:48:05 GMT

I took my 2008 Mazda5 in for service. The service manager said that you can only rotate the tires front to back or back to front. All the unidirectional tires that I have seen have a "v" pattern that should only roll in the pointed direction. These tires do not have that pattern. Where can I get reliable information on these tires?

How do I get the brake drum off a 1993 Mazda MPV?

yennylee — Fri, 12 Sep 2008 02:11:22 GMT

i need to replace rear brake shoe, so how can i take off the brake drum cover
of a 1993 mazda mpv 3.0

I'm about to change a leaky valve cover gasket on a Mazda 626 4 cylinder, year 1999. Can the valve cover be removed?

creeveriver — Fri, 12 Sep 2008 17:46:37 GMT

I'm about to change a leaky valve cover gasket on a mazda 626 4 cylinder year 1999. Can the valve cover be removed without disconnecting the ac hoses and losing the charge? Are there any other likely pitfalls in doing this job? What torque should I use on the valve cover bolts when rebolting?

I have a Mazda MX-3 1.8 v6 losing oil and spark plugs are soaked in oil. 135k miles. Any ideas? Car smokes also.

brithepi2k — Fri, 26 Sep 2008 15:17:54 GMT

it seems as if oil coming out the exhaust 1 litre of oil lost
after 30 mins driving it
one of the spark plugs was lying loose before i noticed the problem
of losing all thanks guys

On the radio display of my 2008 Mazda Tribute, there sometimes appears a fan symbol with the word zone. What is this?

frederique — Tue, 30 Sep 2008 03:22:37 GMT

On the radio display of my 2008 Mazda Tribute, aside from showing the station, the time, etc., also shows off and on the Ext. temp., this I understand. Cannot find anywhere an explanation for the off and on fan symbol I get, along with this symbol is the word zone on one side and cal on the other. What is this and what does it mean???

Did the 85 Mazda RX-7 come in a 2 and 4 cylinder?

skatrboy110 — Fri, 10 Oct 2008 09:17:22 GMT

i just bought a 85 mazda rx-7 and me and my dad are confused cause some parts i look at say 2 cylinder and my car i think is a 4 cylinder and we're just wondering if they made a 2 and a 4 cylinder??

Where is there a good website that shows the location of parts of a Mazda Protege 1996? Thank You!

simplifying — Sun, 19 Oct 2008 11:12:03 GMT

I need a visual labeled diagram, in relatively big pictures that shows where all the parts of a Mazda 1996 Protege on the internet. I want to be able to locate eg, a MAF, or an O2 sensor, etc.

Thankyou!

Has anybody seen a set of P245/50R20 tires for an 07 Mazda CX-9.

joalsgarageinc — Wed, 12 Nov 2008 18:00:40 GMT

I'm told that they are on National Backorder, and I have a customer in my shop that for a week has been searching for them. I've tried everywhere and he's ready to trade it in because of the fact he can't replace a blown tire.