Edmunds Answers

Voted Best Answer

  • avatar MrShift@Edmunds 04/11/09 11:18 am PST

    REMOVAL
    The power window motor and mechanism is integral to the power window regulator unit. If the power window motor or mechanism is faulty or damaged, the entire power window regulator unit must be replaced.


    FRONT DOOR WINDOW REGULATOR

    REMOVAL

    1. Remove door trim panel.
    2. Partially remove waterdam.
    3. Position glass to access the fasteners. Remove the fasteners.
    4. Disengage glass from regulator lift channel.
    5. Position glass up into door frame (rest glass on a block of wood on door reinforcement).
    6. Disconnect regulator wire harness.
    7. Remove screws attaching window regulator to door inner panel.
    8. Remove window regulator from door.

    INSTALLATION

    1. Position window regulator in door.
    2. Loosely install screws attaching window regulator to door inner panel.
    3. Position glass onto window regulator lift channel.
    4. Install glass to lift channel fasteners.
    5. Cycle the window glass to the full up position.
    6. Tighten bolts attaching lower front glass run channel to door inner panel.
    7. Tighten fasteners holding window regulator to door inner panel.
    8. Connect regulator wire harness, if equipped.
    9. Install waterdam.
    10. Install door trim panel.



    Answers

    • MrShift@Edmunds 04/11/09 11:18 am PST

      REMOVAL
      The power window motor and mechanism is integral to the power window regulator unit. If the power window motor or mechanism is faulty or damaged, the entire power window regulator unit must be replaced.


      FRONT DOOR WINDOW REGULATOR

      REMOVAL

      1. Remove door trim panel.
      2. Partially remove waterdam.
      3. Position glass to access the fasteners. Remove the fasteners.
      4. Disengage glass from regulator lift channel.
      5. Position glass up into door frame (rest glass on a block of wood on door reinforcement).
      6. Disconnect regulator wire harness.
      7. Remove screws attaching window regulator to door inner panel.
      8. Remove window regulator from door.

      INSTALLATION

      1. Position window regulator in door.
      2. Loosely install screws attaching window regulator to door inner panel.
      3. Position glass onto window regulator lift channel.
      4. Install glass to lift channel fasteners.
      5. Cycle the window glass to the full up position.
      6. Tighten bolts attaching lower front glass run channel to door inner panel.
      7. Tighten fasteners holding window regulator to door inner panel.
      8. Connect regulator wire harness, if equipped.
      9. Install waterdam.
      10. Install door trim panel.



      ADVERTISEMENT

      Top Dodge Durango Experts View More

      Rank Leader Points
      1. MrShift@Edmunds 190
      2. karjunkie 135
      3. zaken1 95
      4. docj 85
      5. tony78 85
      6. 0patience 70
      7. wasd12 45
      ADVERTISEMENT