Edmunds Answers

Answers

  • kris6613 03/12/08 7:58 pm PST

    check the fuse box i know alot of cars have a reset button there.

  • tallman1 03/12/08 9:43 pm PST

    Push the trip odometer button on the dash and hold it down. Put the key in the ignition and turn it to "on" but do not start the truck. The light should flash and then go out.

  • MrShift@Edmunds 11/04/08 2:48 pm PST

    Resetting the system

    The system must be reset after the engine oil replacement. Reset the system by the following procedure:

    1. Turn the ignition key to the "OFF" position with the odometer reading shown.
    2. Turn the ignition key to the "ON" position while holding down the trip meter reset knob.

    Hold down the knob for at least 5 seconds. The odometer indicates "000000" and the light goes off.

    If the system fails to reset, the light will continue flashing.

ADVERTISEMENT

Top Engine Indicator Lights Experts View More

Rank Leader Points
1. karjunkie 3450
2. MrShift@Edmunds 3270
3. zaken1 1410
4. 0patience 925
5. Stever@Edmunds 535
6. docj 470
7. tony78 395
ADVERTISEMENT